Fife糾偏-檢驗,MAGPOWR張力-控制,Tidland分切-卷取,MAXCESS國際集團,美塞斯產品,美塞斯中國,授權代理商廈門飛美泰貿易有限公司 Fife糾偏-檢驗,MAGPOWR張力-控制,Tidland分切-卷取,MAXCESS國際集團,美塞斯產品,美塞斯中國
首 頁 公司介紹 行業方案 產品信息 服務和支持 熱點新聞 招聘信息 留言板 聯系我們
 

糾偏-檢驗



張力-控制



分切-卷取
美塞斯產品家族 當前位置:首頁 >> MAGPOWR產品首頁 >> TR-5 

TR-5 Tension Readout

TR5Whether you are working with a wide web or single strand web, the TR-5 Tension Readout from MAGPOWR is an excellent choice.  This system can be used on any non-driven idler roll or at any position where the wrap angle of the web or strand does not change. Each load cell contains four foil type strain gages bonded to a sensing beam. These gages convert the load on the roll or sheave to an electrical signal. Within the TR-5, the signal from the load cell(s) is amplified and displayed on the tension meter.

The amplifier of the TR-5 has low drift and high linearity with a gain control range of 8:1 and tare adjustment of 50%. An auxiliary 0 to 10 VDC, or 4 to 20 mADC output is provided for interfacing to other products or systems.

Key Features:

  • Precision tension meter for direct tension readout
  • 8:1 calibration range
  • Tare adjustment of 50% sensor rating
  • Overall system accuracy better than 1%
  • Auxiliary 0 to 10 VDC or 4 to 20 mADC output
  • Operates with either one or two sensors
  • Easy to install and calibrate
  • Improved productivity by eliminating operator dependency
  • Improved quality through reproducible correct machine settings
  • Switch selectable 115/230 VAC input
General Specifications:
§  Power Inputs:
115/230 VAC +/- 10%, 50/60 Hz, switch selectable
§  Tension Input:
0 to 21 mv (one or two 350 ohm full bridges), 0 to 500 mv (one 120 ohm full bridge) 
§  Tension Output:
0 to 10 VDC or 4 to 20 mADC

[返回上一頁]  [返回MAGPOWR產品主頁]
版權所有© 2006-2013 廈門飛美泰自動化科技有限公司 地址:廈門市廈門火炬高新區火炬東路11號創業大廈711單元 郵編:361009
電話: (86)592-2107107 2051408 傳真: (86)592-2107108 Email: [email protected] 網址:http://www.thhsqw.icuhttp://www.feimeitai.com
建議分辨率1024X768,IE6.0以上瀏覽器,以獲得最佳效果。閩ICP備09031839號 技術支持:澤迅網絡

时时彩能赚钱吗